Chapter 2 of NFPA Standard 130 is hereby amended to read as follows:

2.1 General. The documents or portions thereof listed in this chapter are referenced within this standard and shall be considered part of the requirements of this document. Initial construction shall comply with the specific edition of each standard as listed herein. The applicable codes for future additions, alterations or repairs shall be determined by the building official and fire marshal.

2.2 NFPA Publications. National Fire Protection Association, I Batterymarch Park, Quincy, MA 02169

NFPA 10, Standard for Portable Fire Extinguishers, 2013 edition.

NFPA 13, Standard for the installation of Sprinkler Systems, 2013 edition.

NFPA 14, Standard for the installation of Standpipe and Hose Systems, 2013 edition.

NFPA 22, Standard for Water Tanks for Private Fire Protection, 2013 edition.

NFPA 25, Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, 2011 edition.

NFPA 30, Flammable and Combustible Liquids Code, 2012 edition.

NFPA 70, National Electrical Code, 2014 edition.

NFPA 72, National Fire Alarm and Signaling Code, 2013 edition.

NFPA 91, Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate Solids, 2010 edition.

NFPA 101Ò, Life Safety CodeÒ, 2012 edition.

NFPA 110, Standard for Emergency and Standby Power Systems, 2013 edition.

NFPA 241, Standard for Safeguarding Construction, Alteration, and Demolition Operations, 2013 edition.

NFPA 251, Standard Methods of tests of Fire Resistance of Building Construction and Materials, 2011 edition.

NFPA 253, Standard Method. of Test for Critical Radiant flux of floor Covering Systems Using a Radiant Heat Energy Source, 2011 edition.

NFPA 262, Standard Method of Test for flame travel and Smoke of Wires and Cables for Use in Air-Handling Spaces, 2011 edition.

NFPA 286, Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth, 2011 edition.

NFPA 703, Standard for Fire Retardant-Treated Wood and Fire Retardant Coatings for Building Materials, 2012 edition.

2.3 Other Publications.

2.3.1 AMCA Publications. Air Movement and Control Association International, Inc., 30 West University Drive, Arlington Heights, IL, 60004-1893.

AMCA 210, Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating, 2007.

AMCA 250, Laboratory Methods of Testing Jet Tunnel Fans for Performance, 2005.

AMCA 300, Reverberant Room Method for Sound Testing of Fans, 2008.

2.3.2 APTA Publications. American Public Transportation Association, 1666 K Street NW, Washington, DC 20006.

APTA Standard SS-PS-002, Rev 2., 1998.

2.3.3 ASHRAE Publications. American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc., 1791 Tullie Circle, N., Atlanta, GA 30329-2305.

ASHRAE Handbook – Fundamentals, 2009.

ASHRAE 149, Standard of Laboratory Methods of Testing Fans Used to Exhaust Smoke in Smoke Management Systems, 2009.

2.3.4 ASTM Publications. ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959.

ASTM C 1166, Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories, 1991.

ASTM E 1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

ASTM D 2724, Standard Test Method for Bonded, Fused, and Laminated Apparel Fabrics, 2011.

ASTM D 3574, Test I₂ (Dynamic Fatigue Test by the Roller Shear at Constant Force) or Test 1₃ (Dynamic Fatigue Test by Constant Force Pounding), 2008.

ASTM D 3675, Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source, 2009.

ASTM E 84, Standard Test Method for Surface Burning Characteristics of Building Materials, 2011.

ASTM E 119, Standard Test Method for Fire Tests of Building Construction and Materials, 2011.

ASTM E 136, Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750ºC, 2011.

ASTM E 162, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source, 2011.

ASTM E 648, Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source, 2010.

ASTM E 662, Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials, 2009.

ASTM E 814, Standard Test Method for Fire Tests of Penetration Fire stop Systems, 2011.

ASTM E 1354, Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter, 2011.

ASTM E 1537, Standard Test Method for Fire Testing of Upholstered Furniture, 2007.

ASTM E 1590, Standard Test Method for Fire Testing of Mattresses, 2007.

ASTM E 2061, Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles, 2009.

2.3.6 ICEA Publications. Insulated Cable Engineers Association, P. O. Box 1568, Carrollton, GA 30112.

ICEA S-73-532/NEMA WC-57, Standard for Control, Thermocouple Extension, and Instrumentation Cables, 2004.

ICEA S-95-658/NEMA. WC-70, Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy.

2.3.8 IEEE Publications. Institute of Electrical and Electronics Engineers, Three Park Avenue, 17th Floor, New York, NY 10016-5997.

IEEE II, Standard for Rotating Electric Machinery for Rail and Road Vehicles, 2000.

IEEE 16, American Standard for Electric Control Apparatus for Land Transportation Vehicles, 2004.

IEEE 383, Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations, 2003.

IEEE 1202, Standard for Flame-Propagation Testing of Wire & Cable, 2006.

2.3.9 UL Publications. Underwriters Laboratories Inc., 333 Pfingsten Road, Northbrook, IL 60062-2096.

ANSI/UL 44, Standard for Safety Rubber-Insulated Wires and Cables, 2010

ANSl/UL 83, Standard for Safety Thermoplastic-Insulated Wires and Cables, 2008

ANSl/UL 1685, Standard for Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables, 2007.

ANSl/UL 2196, Standard for Tests for Fire Resistive Cables, 2001. Revised December 2006.

2.4 References for Extracts in Mandatory Sections.

NFPA 72, National Fire Alarm and Signaling Code, 2013 edition.

NFPA 101, Life Safety CodeÒ, 2012 edition.

NFPA 253, Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source, 2011 edition.

NFPA 271, Standard Method of Test for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter, 2009 edition.

NFPA 402, Guide for Aircraft Rescue and Fire-Fighting Operations, 2008 edition.

NFPA 472, Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents, 2008 edition.

NFPA 502, Standard for Road Tunnels, Bridges, and Other Limited Access Highways, 2011 edition.

NFPA 921, Guide for Fire and Explosion Investigations, 2011 edition.

2.5 Bellevue City Codes (BCC)

Building Code (International Building Code as adopted and amended by the City of Bellevue – BCC 23.10). 2018 edition

Electrical Code (Washington Cities Electrical Code as adopted and amended by the City of Bellevue – BCC 23.30, 2020 edition

Fire Code (International Fire Code as adopted and amended by the City of Bellevue – BCC 23.11). 2018 edition

Mechanical Code (International Mechanical Code as adopted and amended by the City of Bellevue – BCC 23.50), 2018 edition

Plumbing Code (Uniform Plumbing Code as adopted and amended by the City of Bellevue – BCC 23.60), 2018 edition

Clearing and Grading Code (BCC – 23.76)