(1)Footnote (8) of the dimensional requirements contained in LUC 20.20.010 controls.

(2)Maximum impervious surface is limited to 85 percent. See LUC 20.20.460 for exceptions and performance standards relating to impervious surface.

(3)Minimum setbacks are subject to development of required landscaping pursuant to LUC 20.25F1.050.

(4)Measured from the property line.

(5)No parking or vehicle access lane is permitted between the required sidewalks on perimeter streets and pedestrian entrances and building frontages.

(6)Maximum building height shall be measured from average existing grade as measured to the highest point of the structure, including pitched roof areas and penthouse equipment screening.

(7)On Type C streets located in DA II, no more than 50 percent of the street frontage may be developed with buildings whose height exceeds four stories or 40 feet above the sidewalk grade adjacent to the building front, whichever is less. For the purposes of this requirement, building height is measured to a depth of 20 feet.

(8)At a height no greater than 30 feet above the sidewalk grade adjacent to the building front. No stepback is required for portions of buildings limited to 40 feet in height pursuant to footnote (7) above.

(9)Buildings or portions of buildings that provide a setback of less than 10 feet are required to meet the Type B street frontage design guidelines of the F1 Land Use District Design Guidelines.

(10)No stepback is required if landscape setback is provided pursuant to LUC 20.25F1.050.

(11)A 15-foot setback from the right-of-way line of Factoria Boulevard is required for development in DA IV.