Skip to main content
Loading…
This section is included in your selections.

Pursuant to RCW 58.17.040, boundary line adjustments are exempt from requirements of this chapter except as provided for in this section.

A. All lots modified by this boundary line adjustment procedure shall not be approved for recording if such adjustment would allow a nonconforming dimension as specified in LUC 20.20.010 to become more nonconforming unless the adjustment equalizes more than one adjacent nonconforming lot.

B. No lot line adjustment may be approved when such action would violate an applicable requirement or condition of a previous land use action, subdivision, or short plat approval.

C. All lots modified by the boundary line adjustment procedure shall have legal access meeting the standards of the Transportation Department, the Utilities Department, and any other applicable department.

D. The processing of boundary line adjustments shall be the same as for final short plats as provided in the applicable provisions of LUC 20.45B.210 through 20.45B.230.

E. All boundary line adjustments shall be recorded surveys consistent with Chapter 58.09 RCW. All boundary lines being adjusted shall be surveyed, and newly established lot corners shall be staked.

F. All lots modified by this boundary line adjustment procedure shall not be approved for recording if such adjustment would create a nonconformity with respect to the requirements of this Code. (Ord. 5717, 2-20-07, § 12; Ord. 5480, 10-20-03, § 32; Ord. 4978, 3-17-97, § 16; Ord. 3938, 7-18-88)